VISIT OUR WEB SITE: WWW.APIPLASTICS.COM

Easier and Faster Installation
FlowMax Gold is manufactured to rigorous standards to ensure part to part consistency. Better cuts, consistent fit to fittings, and superior cement adhesion let you get the installation done right (and quickly) the first time – every time. Sorting pipe at the job site, having to cut out bad sections, or in the worst case, getting a callback to the job site of a finished home where finished walls must be torn apart to find a leak, all rob you of your time and profit.

Superior Fit to Fittings
Have you ever had a problem with your fittings being too loose or falling off the pipe? Have you ever had to hammer a fitting on to the end of a pipe? If so, you’ve probably been seeing the effects of bad or inconsistent pipe outside diameter. Using our proprietary, outside diameter production control technology, we have remarkable control on the outside diameter of our FlowMax Gold. This means a superior and very consistent fit.

Excellent Value
Even with all of these added features and benefits, FlowMax Gold costs only slightly more per foot, but we are probably one of your best real values. Even at 2 cents more per foot, on a house that uses 150 feet of vacuum tubing, the cost would only be $3.00 more for the entire house. A couple of saved recuts, re-glues, or callbacks are more than enough to easily pay for this. Also, several dealers and installers have expressed fears of pipe or joint failure in the future causing them a future liability. Peace of mind is worth a lot.

Why choose FlowMax Gold? Here are the key factors why several Central Vacuum OEM’s have made FlowMax Gold their only pipe of choice and why it is the best vacuum tubing on the market…

High-Quality Material
FlowMax Gold is produced only from 100% virgin PVC material. We use no recycled material or ground-up plastic of any type in FlowMax Gold. This recycled material basically comes from discarded plastic products or scrap that is gathered together, ground up, reheated, and re-extruded into vacuum pipe. Scrap material typically varies from lot to lot depending on what has been ground up. The nature of scrap makes it hard to keep out foreign materials. Because of this, reused plastic often contains foreign materials like metal, stone or other non-PVC plastic materials that can cause poor glue adhesion, holes, tears, rough inside surfaces, inconsistent wall thicknesses, out-of-spec diameters, or easily cracked pipe.

Don’t Blame the Cement
If you’ve ever had a pipe joint leak or had a joint come completely apart, it may be the fault of the pipe. PVC cement works by “melting” the PVC in the pipe and fittings, but it isn’t formulated to “melt” any of the foreign materials like metal, stone, or other non-PVC plastic materials that may end up in the pipe. Because we use only 100% pure virgin PVC and have no foreign materials, our entire pipe surface is working to lock and seal the pipe to the fittings. Also, if your pipe is undersized in outside diameter, an oversized gap is formed between the pipe and fitting. Since PVC cement is not designed to bridge oversized gaps, the joint quality is compromised. Because of the tight outside diameter control on our FlowMax Gold pipe, you consistently get the optimum glue gap for a tight joint.

And now you can buy FlowMax Gold direct from Available Plastics. For ordering information, call 1-800-633-7212.

Available Plastics, Inc.
5020 Beechmont Drive
Huntsville, Alabama 35811
(800) 633-7212 -  (256) 859-4957 - Fax: (256) 851-7723
E-Mail: sales@apiplastics.com